T2600G-18TS and Philips Hue / Apple Homekit can't find it.

T2600G-18TS and Philips Hue / Apple Homekit can't find it.
T2600G-18TS and Philips Hue / Apple Homekit can't find it.
2020-04-11 20:22:10 - last edited 2020-04-11 20:27:02
Hardware Version: V1
Firmware Version: 1.0.0 Build 20170105 Rel.55239(s)

Hello Guys,

 

maybe you can help me. First of all, i own a Fritzbox 7590, a T2600G-18TS, Synology Diskstation, Philips Hue and a lot of Apple Hardware. I only use the LAG for my Synology Diskstation. Nothing else is configure, all config by default (VLAN1).

 

The issue: I'm not able to reach my Philips Hue Hub over Apple Homekit, when i plug the ethernet cable to the T2600G. If i plug the cable to my Fritzbox 7590 i can reach it over the Apple Homekit. I already swap my T2600G to a non managed switch and the effect is i can reach it, too. So I think the issue is between the T2600G and Philips Hue. I another community board, they told me, that is a Multicast/IGMP config thing, but i don't know to configure these thing. I already played with the Multicast and IGMP settings, but nothing happend.

 

My config:

 

Fritzbox 7590

T2600G

Synology Diskstation

Philips Hue

Apple Devices

 

Internet Hardware Hardware Hardware Does it work?
Internet Fritzbox 7590 T2600G Philips Hue no
Internet Fritzbox 7590 non managed switch Philips Hue yes

 

Can you help me?

0
0
#1
Options
2 Replies
Re:T2600G-18TS and Philips Hue / Apple Homekit can't find it.
2020-04-13 06:16:59

@donbender 

 

If your non managed switch doesn't support IGMP snooping, I think you don't need to enable IGMP snooping on T2600G as well. Maybe you can check if T2600G has IP conflict with other devices. T2600G uses IP address of 192.168.0.1 by default.

0
0
#2
Options
Re:T2600G-18TS and Philips Hue / Apple Homekit can't find it.
2021-04-11 10:58:05

@donbender Hi,

 

I have the same problem. Did you get it to work?

 

Thanks.

 

Gil

 

 

0
0
#3
Options