SNMP V3 not working properly

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SNMP V3 not working properly
SNMP V3 not working properly
2020-05-26 09:58:43 - last edited 2020-06-06 10:43:22
Hardware Version: V2
Firmware Version: 2.0.0 Build 20160922 Rel.61508(s)

Hy

I have a few tp link switches and with the 1600g-52ps i have problems with the snmp.

I recive this in my monitoring system:

root@monitor:/home/akovacs# snmpwalk -v3 -m ALL -l authPriv -u telegraf -a MD5 -A <pass> -x DES -X <authpriv_pass> switch1
Bad operator (INTEGER): At line 73 in /usr/share/snmp/mibs/ietf/SNMPv2-PDU
snmpwalk: Timeout (plaintext scopedPDU header type 00: s/b 30)

 

With snmpwalk -v 2c -c <community> switch1 its working.

With the other switches there is no problem with the v3 snmp.

 

Thank you for the help!

bolvar

0
0
#1
Options
1 Reply
Re:SNMP V3 not working properly
2020-06-12 03:03:49

@bolvar 

 

T1600G-52PS 2.0 supports to upgrade to the V3 firmware. I think you can download the 3.0 firmware from official website and try to upgrade, then test SNMP V3 again. 

0
0
#2
Options
Related Articles