Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP
Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP
2020-06-18 16:04:47

Hi, hopefully a simple question/recommendation request for my home office solution.  I currently have a Cisco SG200-8 switch that works fine but I need more ports as my network hub has grown. 

 

Requirements:-

  • 16 ports or more
  • Fanless
  • 802.3ad LACP supports as I have a Synology disk station that I use link aggregation on.
  • POE is a nice to have

 

I’ve looked at the TP-Link product line up and the following seem to offer what I need:

  • TL-SG2216
  • T1600G-18TS
  • T1700G-28TQ

 

Have I missed anything obvious in these models and recommendation?

 

Thanks in advance, Peter

  0      
  0      
#1
Options
2 Reply
Re:Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP
2020-06-24 03:31:42

@PeterWBaker 

 

It seems that all TP-Link PoE switches have fan. So maybe you need a non-PoE switch.

 

T1700G-28TQ support stack function. If you don't need stack, do not suggest this model. So you can choose T1600G-18TS or T1600G-28TS.

  0  
  0  
#2
Options
Re:Recommendation for Fanless network switch with 16+ ports must support 802.3ad LACP
2020-06-24 07:33:18

@Andone Thanks for the reply, yes I came to the same conclusion about PoE and fans which kind of makes sense...  Will go without PoE as not having the noise is more important, appreciate the reply above.  Peter

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1257

Replies: 2