T2600G logs flooded with errors ' Failed to create Multicast Group hardware.'
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have setup multicast on a T2600G switch.
Very basic configuration for the time being (5 ports activated : 1 router + 4 devices).
IGMP : activated on VLAN 1
No static router ports defined.
MLD : activated on VLAN 1
No static router ports defined.
Multicast info shows :
- 1 or 2 IGMP groups active
- around 15 MLD groups active.
Logs are flooded with messages : (around 1 message per minute)
| 9 |
2021-02-08 13:22:59
|
MCAST
|
level_2
|
Failed to create Multicast Group hardware.
|
| 10 |
2021-02-08 13:22:38
|
MCAST
|
level_2
|
Failed to create Multicast Group hardware.
|
| 11 |
2021-02-08 13:21:20
|
MCAST
|
level_2
|
Failed to create Multicast Group hardware.
|
| 12 |
2021-02-08 13:20:33
|
MCAST
|
level_2
|
Failed to create Multicast Group hardware.
|
| 13 |
2021-02-08 13:18:27
|
MCAST
|
level_2
|
Failed to create Multicast Group hardware.
|
ip igmp snooping vlan-config 1
ip igmp snooping vlan-config 1 immediate-leave
ip igmp snooping vlan-config 1 rtime 300
ip igmp snooping vlan-config 1 mtime 260
ip igmp snooping vlan-config 1 ltime 1
ipv6 mld snooping vlan-config 1
ipv6 mld snooping vlan-config 1 immediate-leave
ipv6 mld snooping vlan-config 1 rtime 300
ipv6 mld snooping vlan-config 1 mtime 260
ipv6 mld snooping vlan-config 1 ltime 1
Do you know where these errors comes from ?
How to get rid of them ?
Thanks for your help.
