T1600G-28TS trunking issue
I'm new with TP-Link products and I'm stuck with a trunk port configuration.
Basically, I have a proxmox server with a couple of VMs/containers running, including my Pfsense who act as L3 router for my inside network and as internet router.
For informations here is my proxmox configuration :
My VMBR2 bridge is "VLAN aware" and bridge to enp4s0 physical port.
My VM is set to TAG frames with VID 2.
If i capture the traffic directly on my proxmox host, I can see my VLAN tag (on physical and bridge interfaces)
If I capture the traffic on the switch (monitor session) I cannot see the VLAN ID anymore,
Here is the switch configuration :
interface gigabitEthernet 1/0/24
switchport general allowed vlan 2,10-14,99 tagged
no switchport general allowed vlan 1
T1600G-28TS#sh interface switchport gigabitEthernet 1/0/24
Member in LAG: N/A
Link Type: General
Member in VLAN:
Vlan Name Egress-rule
---- ----------- -----------
2 N/A Tagged
10 N/A Tagged
11 N/A Tagged
12 N/A Tagged
13 N/A Tagged
14 N/A Tagged
99 N/A Tagged
I don't understand what I'm missing. If someone could help me it would be appreciated.