DHCP no ofert with ACL configuration switch TL-SG2428P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP no ofert with ACL configuration switch TL-SG2428P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP no ofert with ACL configuration switch TL-SG2428P
DHCP no ofert with ACL configuration switch TL-SG2428P
2021-06-14 21:48:55
Model: TL-SG2428P  
Hardware Version: V1
Firmware Version: 1.0.1 Build 20210407 Rel.55771

I am doing a configuration on a switch TL-SG2428P with ACL to prevent networks or vlans from communicating with each other.

the problem is that I need DHCP service in one of the vlan.

I did test configuring on the same switch - DHCP SERVER and it does not deliver IP.

then I tried configuring DHCP RELAY and it doesn't work either.

if I remove the ACL configuration the DHCP works and delivers IP.

I put the ACL again and DHCP no longer delivers IP.

 

Are there any settings for the ACL to include?

 

Thanks!!!

 

 
Rule ID S-IP D-IP IP Protocol Action
1
172.1.66.0
172.3.66.0
No Limit
Deny
2
172.3.66.0
172.1.66.0
No Limit
Deny
3
172.3.66.0
172.5.66.0
No Limit
Deny
4
172.5.66.0
172.3.66.0
No Limit
Deny
11
172.1.66.0
 
 
No Limit
Permit
12
172.3.66.0
 
 
No Limit
Permit
13
172.5.66.0
 
 
No Limit
Permit
  0      
  0      
#1
Options
1 Reply
Re:DHCP no ofert with ACL configuration switch TL-SG2428P
2021-06-19 08:28:06
Not sure your topology and requirements, but maybe this video will be helpful for you: https://www.youtube.com/watch?v=7i17jvrIjD0
  0  
  0  
#2
Options