Wich product is right for me?
Hello everyone, I have a question for everyone.
I'm planning to extend my WiFi over the vineyard for the connection of a meteo station.
The meteo station is aprox. 88meters frome where the antenna will be installed.
If is possible I olso would like to extend the WiFi on all the red area (or more) maybe I can Have some problem in the blue aera where the building can obstruct the repeater signal.
In the first time I've seen the cpe710 but for what I've read is for more longhest distance.
Can you share with me some great solution? multi ssdi repeater will be preferable.
Thanks for the support
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If you want to extend the WiFi on all the red area (or more), you should have a look at EAP225-Outdoor instead of CPE.
CPE is designed for long distance point to point connection, CPE710 has a narrow coverage[9° (Azimuth)/7° (Elevation)], not an ideal solution for you.
EAP225-Outdoor also supports multi-SSID, and even more powerful, it's dual-band and omnidirectional.
- Copy Link
- Report Inappropriate Content
@Virgo thank you for the reply.
Having the necessity of make a remote desktop to the meteo station can I install a CPE antenna on the meteo station, and wich one is compatible???
(This can solve oneother problem cause in the meteo station I have only a etherneth plug)
- Copy Link
- Report Inappropriate Content
You have to connect PC to CPE to install it.
what mode do you like to use CPE on the remote the meteo station, Client mode? If so, you can set up Client CPE in your house, and then relocated it.
I rechecked your situation, if you just want point to point connection, you should use CPE, if you want an outdoor Wi-Fi coverage for mobile devices, you should get EAP225.
- Copy Link
- Report Inappropriate Content
@Virgo the problem is that I want an hybrid solution in one.
I know how configure it (ap, client etc
As you can see here https://community.tp-link.com/en/business/forum/topic/220124
I wanted to do a reverse thing, Having a AEP225 as acces point and a CPE510 as client on the meteo station as in figure...you think is possible??
- Copy Link
- Report Inappropriate Content
Oneother thing to consider is this, I have nothing in the middle, the two antennas will see face by face, but around I have some three like this:
I will have problems?
- Copy Link
- Report Inappropriate Content
EAP should work with CPE without problem, but they are not in the same height, so just make sure to adjust the angel to make them has the best signal.
These parameters are in the datasheet.
And TP-Link says something about clear Fresnel zone, here is the link just for your reference, I'm not a specialist in these theoretical things, lol
- Copy Link
- Report Inappropriate Content
@Virgo thank you so much, yes I think I will need to find the right angle for the cpe510.
The obstacle are only in the near the antennas in the middle there's nothing...I will try thank, you so much!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 863
Replies: 7
Voters 0
No one has voted for it yet.