Can't Connect to my CPE210 V2 via wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't Connect to my CPE210 V2 via wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't Connect to my CPE210 V2 via wifi
Can't Connect to my CPE210 V2 via wifi
2021-07-01 10:29:17 - last edited 2021-07-01 10:51:54
Model: CPE210  
Hardware Version: V2
Firmware Version: 2.2.3 Build 20201110 Rel. 66916 (5553)

Can't Connect to my CPE210 V2 fm:2.2.3 Build 20201110 Rel. 66916 (5553) via wifi

it in AP mode but no device can connect to it

on my phone it just disconnects as soon as i press connect on my pc i get can't connect to this device 

i have 2 the same device they see each other and connect but any other device wont connect

 can any one help me

this is my wireless settings

  0      
  0      
#1
Options
3 Reply
Re:Can't Connect to my CPE210 V2 via wifi
2021-07-02 07:00:52

@Shono 

 

Here are my suggestions, hope they are helpful.

 

1. Why you set the distance to 27km? 

How to Configure the Distance Value on Pharos Products

 

Enter the distance manually in the input box. The valid values are from 0 to 200km, and we recommend that you set the value to 110% of the real distance.

 

If you want to connect a mobile phone or PC to this AP, do not set that high value on distance settings.

 

2. Please make sure the distance isn't too far when you are trying to connect to it.

 

3. Change to a simple password, on your devices, forget the old network on your devices, use the new Wi-Fi password and try to connect again.

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Can't Connect to my CPE210 V2 via wifi
2021-07-02 08:03:51

@Virgo changed  it to 0 connect to it but no internet 

  0  
  0  
#3
Options
Re:Can't Connect to my CPE210 V2 via wifi
2021-07-03 02:05:26

@Shono 

make sure CPE has connected to the router successfully. Check the connectivity between Router and LAN port on the PoE injector.

 

And you mentioned you have 3 CPEs, make sure they all have different IPs.

 

 

Just striving to develop myself while helping others.
  0  
  0  
#4
Options