CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS
CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS
2021-07-07 09:23:16
Model: TL-SG3428X  
Hardware Version: V1
Firmware Version: 1.0.3 Build 20210409

HI, is there anyway to setup the management vlan on this switch? Unlike the SG-3428 System info, this one doesnt have the feature to change default vlan on it.  Have configured vlans on it. Just want to change the default vlan and its ip.

  0      
  0      
#1
Options
2 Reply
Re:CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS
2021-07-07 14:04:10

@AthlonX2 you are using it in standalone or in the controller? 

 

if in standalone, just setup a different untaged pvid on whatever port you like.

 

in controller I think you need the latest firmware and you would have a setting in config that would allow you to enable the vlans; once enabled, they are untaged if you chose a port profile with a single vlan (other than the default lan - pvid1)

  0  
  0  
#2
Options
Re:CHANGE MANAGEMENT VLAN AND SWITCH IP ADDRESS
2021-07-08 10:27:58
There is a TP-Link official guide for both standalone mode and controller mode: https://www.tp-link.com/en/support/faq/2814/
  0  
  0  
#3
Options