help me step by step to configure it please do me a favour.

fren dyanmac see my post in page 2 and it is the image after obtaing ip adress autaomaticaly by enabling dhcp in tplink and puuting the dhcp of digicom in tplink u can see in page 2..please do me a favour ..help me

Help me

Please answer this questions, if your laptop has wireless internet when you try to connect via Lan cable to 5210 do you disable it.
and did you upgraded 5210 to latest firmware.
Digicom is 192.168.1.1 and you have 5210 in 192.168.1.8 last time you posted a picture of Network Lan, next time you default the 5210 leave it with its default ip 192.168.1.254 no need to change is the same subnet
Why do you insist to enable DHCP on 5210 it is DISABLE
you have not answere about resetting the 5210 to factory default and trying Universal Repeater here http://www.tp-link.us/article/?faqid=348
When you configure and configure the 5210 many times it odes not respond untill you reset it to factory default and start over its a bug in this device.
Answer this question, if your laptop has wireless internet when you try to connect via Lan cable to 5210 do you disable it.

In my laptop there is no wirles conection and no net but wifi is on.i have postd the digicom information i want a fresh configuration and ya i updated the firmware and restore the factory setings.please teach me stp plz.i wil provide u the information.plz

i have send you the step by step guides many times in this thread please reset your 5210 to factory default go to system tools factoy defaults leave the ip of the 5210 as default and follow this guide Universal Repeater, here http://www.tp-link.us/article/?faqid=348 just ignore the security cause you have posted digicom has no security unless you are mistaken there, and that has been your problem, and DO NOT ENABLE DHCP
Please make sure the Digicom uses no security, not by connecting via lan cable, that way will never ask you for security, has to be wireless or surf into Digicom security and check if its disable or uses WEP or WPA security.

I did . . It does not work . . .i did step by step then also its same problem . . The subnet and gateway is not showing . . The single is 22 db. . I hope you understand and help me . .

[ATTACH=CONFIG]0[/ATTACH]

fren i connect digicom by WiFi of my laptop but not by tlink 521og and its details look that

this is the detail

upload a picture of 5210 status please
and if you are in Universal Repeater mode, are you able to connect via wireless to digicom close to the 5210
all your testing via lan cable to 5210 wireless adapter of your laptop has to be disable.
We had a problem like yours in my country not log time ago, the 5210 could not connect to a certain brand of modem to discard that issue with you i see on your survey you have other open networks try other dont matter the DBs we justa want to test the 5210 with other network.