Configuring Pharos CPE210 to connect two buildings - Multiple VLANs

Configuring Pharos CPE210 to connect two buildings - Multiple VLANs
Configuring Pharos CPE210 to connect two buildings - Multiple VLANs
2021-09-22 14:57:46 - last edited 2021-09-27 09:24:04
Model: CPE210
Hardware Version: V2
Firmware Version:

Hello,

we have a detached room in a garden which cannot connect through WIFI because the indoor signal is too weak, so we have thought about the CPE210 which could be attached outdoor. We need to pass network VLAN traffic. Does this unit support this? Would this be configured in bridge mode? 

0
0
#1
Options
1 Accepted Solution
Re:Configuring Pharos CPE210 to connect two buildings - Multiple VLANs-Solution
2021-09-27 09:01:56 - last edited 2021-09-27 09:24:04

@SmilingDad 

 

Hi, you may refer to R1D2's reply on this post:

https://community.tp-link.com/en/business/forum/topic/172992

Recommended Solution
1
1
#3
Options
3 Reply
Re:Configuring Pharos CPE210 to connect two buildings - Multiple VLANs
2021-09-23 07:22:13

@R1D2 what I would like to achieve is this

 

 

All traffic including VLANs must pass over the wireless connection. Can the Pahros210 achieve this? What configuration is required? AP + Client

0
0
#2
Options
Re:Configuring Pharos CPE210 to connect two buildings - Multiple VLANs-Solution
2021-09-27 09:01:56 - last edited 2021-09-27 09:24:04

@SmilingDad 

 

Hi, you may refer to R1D2's reply on this post:

https://community.tp-link.com/en/business/forum/topic/172992

Recommended Solution
1
1
#3
Options
Re:Configuring Pharos CPE210 to connect two buildings - Multiple VLANs
2021-09-27 09:24:20

@Virgo thanks, I will try that!

0
0
#4
Options