help with a vlan issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
help with a vlan issue
help with a vlan issue
2021-09-29 13:02:59
Hardware Version: V1
Firmware Version: 1.0.1

here is my network 

 

Draytek 2862 router  with 2 lans set up .

lan 1 192.168.2.1 /24 dhcp on 

lan 2 192.168.1.1/24 dhcp on with a vlan tag of 30
one oc200 
3 x eap 225 

one dumb switch but now with a TL-SG2008P v1.0

 

setup with dumb switch (working)


if i set up a wireless network for guests with vlan 30 on the eaps and general wireless without tags 
the vlan has been added to the draytek using vlan tag 30 
( vlan 30 dhcp running lan 2 192.168.1.1/24 and lan 1 is 192.168.2.1/24) 

 

so guest get a 192.168.1.x IP 

 

and others connecting to general get a 192.168.2.x ip 


now i have added a TL-SG2008P v1.0 it does not seem to pass the VLAN tag for the guest network but works fine on  the normal ssid 


how can i get the TL-SG2008P v1.0 to see both vlan traffic from the guest ssid and talk to the 2lan dhcp 

 

thanks for anything you can help with 

rob.

  0      
  0      
#1
Options
1 Reply
Re:help with a vlan issue
2021-09-30 08:16:25

@Robaskew 

Not sure what your complete configuration is like, but the two ports of the switch connected to the router and EAP should be set to tagged

  0  
  0  
#2
Options