No Upgrade for TL-SG108PE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Upgrade for TL-SG108PE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No Upgrade for TL-SG108PE
No Upgrade for TL-SG108PE
2021-12-06 09:45:27 - last edited 2021-12-14 06:52:26
Model: TL-SG108PE  
Hardware Version: V2
Firmware Version: 20191204

Hello,

I have a couple of TP-Link APs and a PoE switch TL-SG108PE.

I occasionally upgrade the APs without any issues.

Recently, I wanted to upgrade the TL-SG108PE switch to the latest version. However, I have no upload firmware option. For the APs I upload the firmware file and then click on the upgrade now. With the switch, though, there's only an upgrade button but no way of uploading the latest firmware.

See screen shot below - kindly advise:

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:No Upgrade for TL-SG108PE-Solution
2021-12-08 09:39:40 - last edited 2021-12-14 06:52:26

@Zosha 

 

Uhm.....have you ever tried to reset this switch?

You can backup the files of all settings firstly and reset the switch, after that check if the issue still exist.

 

 

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:No Upgrade for TL-SG108PE
2021-12-07 08:42:09

@Zosha 

 

If you click “Ready” does the import files page appear?
Or does it jump back to this screen?


Otherwise try a few more web browsers, preferably with the private window.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:No Upgrade for TL-SG108PE
2021-12-07 15:18:56

Hi @Virgo,

When I click Ready the switch goes to some sort of halt mode, he basically becomes unavailable until I reboot it.

And no, the ready button doesn't present the option to upload firmware.

I tried from few different browsers in Icognito/Private window.

  0  
  0  
#3
Options
Re:No Upgrade for TL-SG108PE-Solution
2021-12-08 09:39:40 - last edited 2021-12-14 06:52:26

@Zosha 

 

Uhm.....have you ever tried to reset this switch?

You can backup the files of all settings firstly and reset the switch, after that check if the issue still exist.

 

 

 

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#4
Options
Re:No Upgrade for TL-SG108PE
2021-12-13 12:54:15

Hi,

Indeed after resetting the switch I click on Firmware upgrade and then a new window comes up providing the option to upload new firmware.

Thanks!

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1112

Replies: 4

Related Articles