TL-SG108PE switch sending frequent layer 2 broadcast packets, protocol = 0x8899
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108PE switch sending frequent layer 2 broadcast packets, protocol = 0x8899
Hello,
I have the TL-SG108PE running 1.0.1 Build 20211021 Rel.56865
It is unexpectedly sending layer 2 broadcast packets every 1s, layer 2 eth protocol = 0x00008899
why does TPLink use a non-standard protocol for loop detection ?
why does TPLink not use industry accepted IEEE 802.1D STP or IEEE 802.1w RSTP protocol BPDU packets for loop detection instead ?
1 Accepted Solution