how to enable the test mode in cpe510

how to enable the test mode in cpe510

how to enable the test mode in cpe510
how to enable the test mode in cpe510
2022-09-30 16:14:55 - last edited 2022-10-10 00:59:46
Model: CPE510  
Hardware Version: V3
Firmware Version: 2.2.1 build 20200612 REL. 38059 (5553)

CPE510 V.3.20 Firmware 2.2.1 build 20200612 Rel. 38059 (5553)

In the configuration tab is not the option Country or Region; then is not possible select the "test mode"; in my case these will be installed in Venezuela here we have not restrictions about frequencies uses or bands. I was try actualize the device to firmware 2.2.2 Build 20201111 (UN), I was download it from the TP-LINK WEB but the Country or Region is not in device configuration page. It bug causes many another several errors and problems in the configuration process, example: if one setting the "nano station"  how client with channel static 153 / 5765MHz, SNR 24, signal/noise -66/-90 dBm, and right all security parameters ; the radio link can not establish.

I was explore the CPE510 V.3.20 firmware 2.2.2 Build 20201111 (UN) file system Whit ssh app; in the path /web/modules/wireless/view/ the file basic_settings.html are comment the lines 43 to 48 where are the configuration instructions but the file system is read only.

I have another CPE510 V3.20 Firmware 2.2.1 Build 20200612 Rel. 38059 (0000), in it device the "test mode" is aviable; It device work fine and I have not problems with it.

¿It's possible download or transfer the file Firmware 2.2.1 Build 20200612 Rel. 38059 (0000) from one to the another device?

¿What I can do?

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 122

Replies: 0

Related Articles