Usage (%) Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Usage (%) Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Usage (%) Switch
Usage (%) Switch
2022-10-15 20:44:26
Model: SG2210P   TL-SG2218  
Hardware Version: V3
Firmware Version: 3.20.5

Dear .....,

 

Since I have done a firmware update in 2 September 2022;

the Usage (%) increase from flat 36% to 56% and 45% but unstable of the TL-SG2210P v3.20 3.20.5 and 

Since I have done a firmware update at 17 August 2022;

the Usage (%) increase from flat 37% to 56% and 75% but unstable of the TL-SG2218 v1.0 1.1.4

 

Every weekend I'll do a system reset, but the Usage (%) is not back at stable numbers, is that correct after the firmware update? Can this set to the previous settings?

  0      
  0      
#1
Options
2 Reply
Re:Usage (%) Switch
2022-10-18 06:40:11

  @BartD. 

 

Are there any real instability problems with these two switches in practice, after upgrading the firmware?
If the switches are unstable, can you describe the exact problem phenomenon?

Have you downgraded the firmware of the switches to test that the problem is still recurring?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Usage (%) Switch
2022-10-19 07:51:35

  @Virgo 

 

Hello Virgo,

 

The switches are not instable and I have not done a downgrade.

 

It was just mentioned by "monthly" checking the graphics in the dashboard. I find it strange after upgrade the usage is increased and no hardware is added to the infrastructure and no settings are changed of the hardware.

 

Best Regards,

Bart

  0  
  0  
#3
Options