Business Community > Switches > TL-SG1008P: PoE not working with TL-WA1201
< Switches

TL-SG1008P: PoE not working with TL-WA1201

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG1008P: PoE not working with TL-WA1201

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG1008P: PoE not working with TL-WA1201
TL-SG1008P: PoE not working with TL-WA1201
2022-12-05 20:22:13
Tags: #PoE
Model: TL-SG1008P  
Hardware Version: V6
Firmware Version:

PoE does not work with TL-WA1201 V3.

Specifcations say that ports can provide up to 30W with a max total of 64W. However I have only 1 port used and the CAT-5 network cable is only 1m long.

The specifications of the TL-WA1201 say 12V/1,5A which is 18 W, so well below the 30W.

The TL-WA1201 has a "Passive PoE injector" box included and that works, but I want to use the PoE from the TLL-SG1008P switch.

What is wrong?

  0      
 
  0      
 
#1
Options
2 Reply
Re:TL-SG1008P: PoE not working with TL-WA1201
2022-12-06 04:11:13

  @Reusens The switch outputs active POE that uses a IEEE 803.2af/at standard, this is not compatible with passive POE.  Active POE needs to negotiate with the client that it is safe before sending power.  Passive POE is always-on power and can easily cause damage to non-POE equipment.

  2  
  2  
#2
Options
Re:TL-SG1008P: PoE not working with TL-WA1201
2022-12-06 05:58:32

  @Reusens 

TL-WA1201 does not support standard PoE

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 637

Replies: 2

Tags

PoE
Related Articles
TL-SG1008P and EAP235
730 0
 TL-SG1008P POE not working
2948 0
Poe not working on TL-SG2428P v4.0
348 0
is TL-SG2210P POE+ compliant?
490 0
TL-SG2428P V4 does passive POE?
982 0
TL-SG2210MP v4.0 constant POE errors for EAP650
773 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.