TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0
TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0
2022-12-08 11:42:59 - last edited 2022-12-29 07:54:59
Tags: #Firmware Update #BootUtil
Model: TL-SG3428XMP  
Hardware Version: V1
Firmware Version: 1.0.2

I have a TL-SG3428XMP switch which suddenly stopped allowing login and all cameras connected to it stopped their feeds, although it was pinging.

 

I tried to reset it with a console cable, as i had a recent backup of the configuration and there were no changes. 

 

When I just reset it using option 2 in the BootUtil menu i was able to change the password post reboot but get the following error when i tried to reboot the switch.

 

 "TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0"

 

i reset it again and this time around i used option 4  Active Backup Image to use the backup image using Option 2

 

then the switch got reset and i was able to login to the GUI.

 

i subsequently upgraded the firmware to the latest version 1.0.8. and restored the config backup and we were back in business.

 

Hope this document will help anyone who gets this error. 

  4      
  4      
#1
Options
2 Reply
Re:TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0
2023-03-09 21:33:35

  @RD1 

On my TL-SG3428X i got a similiar behavior .

But i cant Upgrade d. Firmware 

When i Upgrade d. Firmware from the Gui the Switch comes back online (Ping work and from the LED State there is some traffic)

But i cant access the Webinterface anymore 

 

Than i connected my consolecable to the switch and rebooted it , and with the console Connected i choose the reset function and nothing

With the Function 4 i´ll get back to default settings can access the gui but when i try to Update d. Firmware and boom same again

 

i also have the tpserver get client 10 fail,sock 0 message 

  0  
  0  
#2
Options
Re:TPMSG:(_tpmsg_send_s)tpserver get client 10 fail, sock 0
2023-03-10 04:55:25 - last edited 2023-03-10 05:07:09

hello @h3llfire Have you tried updating the firmware through other means? e.g. upload from a tftp server.

 

please also confirm the "Access Level" of the user which has logged in is Admin.

  0  
  0  
#3
Options