CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 to IP camera connection problem
CPE510 to IP camera connection problem
2023-01-10 18:55:25 - last edited 2023-01-11 06:00:59
Model: CPE510  
Hardware Version: V3
Firmware Version: v3

hi 

I purchased CPE510 and and trying to use it for lift camera, it is working while i use for short distance cable but when i use 20mtrs cable brand honeycom

it is not working. is it nesserty to use dlink cat6 cable 

  0      
  0      
#1
Options
1 Accepted Solution
Re:CPE510 to IP camera connection problem-Solution
2023-01-11 05:59:31 - last edited 2023-01-11 06:00:59

  @noms 

 

It depends on the cable. A good quality cable should work.

 

But under my experience, the most important thing is that you cannot use a long cable between the main router and the PoE injector.

The long cable can only be from PoE injector to the CPE.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:CPE510 to IP camera connection problem-Solution
2023-01-11 05:59:31 - last edited 2023-01-11 06:00:59

  @noms 

 

It depends on the cable. A good quality cable should work.

 

But under my experience, the most important thing is that you cannot use a long cable between the main router and the PoE injector.

The long cable can only be from PoE injector to the CPE.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 349

Replies: 1

Related Articles