Setup Help - Multiple Clients and 1 or 2 AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setup Help - Multiple Clients and 1 or 2 AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setup Help - Multiple Clients and 1 or 2 AP
Setup Help - Multiple Clients and 1 or 2 AP
2023-09-08 19:31:15 - last edited 2023-11-30 08:31:35
Model: CPE710  
Hardware Version: V7
Firmware Version:

I have 3 CPE710 set as Client and 1 CPE710 setup as AP 

 

All 3 Clients are spread out within about 60 to 75 degrees from the AP 

 

1 Client is about 5 to 7 miles aways from AP and sees the AP but cannot connect to it

 

2 Clients are about 1/2 to 1 mile from AP

 

1 Client connects solid with no issues

 

1 Client keeps dropping signal

 

Any suggestions would be helpful

 

Also is there a wider angle antenna that maybe better as AP?

 

Thank you...

  0      
  0      
#1
Options
1 Accepted Solution
Re:Setup Help - Multiple Clients and 1 or 2 AP-Solution
2023-09-11 07:32:03 - last edited 2023-11-30 08:31:35

  @pointaction 

 

Hi, CPE is equipped with directional antenna as it is designed for point-to-point long-distance network transmission, CPE710's wireless signal is mainly focused on its front panel and has a very limited 9 degree angle, we can say that there is almost no signal on its side and back panel. So in this situation, maybe the CPE210 is a better choice.

       

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Setup Help - Multiple Clients and 1 or 2 AP-Solution
2023-09-11 07:32:03 - last edited 2023-11-30 08:31:35

  @pointaction 

 

Hi, CPE is equipped with directional antenna as it is designed for point-to-point long-distance network transmission, CPE710's wireless signal is mainly focused on its front panel and has a very limited 9 degree angle, we can say that there is almost no signal on its side and back panel. So in this situation, maybe the CPE210 is a better choice.

       

Just striving to develop myself while helping others.
Recommended Solution
  0  
  0  
#2
Options
Re:Setup Help - Multiple Clients and 1 or 2 AP
2023-09-11 18:54:44

What these below

 

Omada Pro AX1800 Indoor/Outdoor WiFi 6 Access Point

AX3000 Indoor/Outdoor WiFi 6 Access Point

 

Could this provide better angles for better connections to a CPE710 Client?

 

  0  
  0  
#3
Options
Re:Setup Help - Multiple Clients and 1 or 2 AP
2023-09-12 02:38:42

  @pointaction 

 

EAP outdoor devices has the 150m WIFI coverage radius with the omnidirectional antenna, you can use it as the access point and use the CPE as the Client mode if the distance between AP and client is not too far.

Just striving to develop myself while helping others.
  0  
  0  
#4
Options