Adoption loop with TL-SG2428P

Adoption loop with TL-SG2428P

Adoption loop with TL-SG2428P
Adoption loop with TL-SG2428P
2024-01-18 08:34:17 - last edited 2024-01-26 02:42:21
Model: TL-SG2428P   OC200  
Hardware Version: V4
Firmware Version: 4.0.6

Hi!

 

Yesterday I wanted to add a new switch to my setup.

 

My hardware is:

 

OC200 hardware controller.

HW: v1.0

FW: 1.26.3, Controller Version 5.12.9

 

Router ER-605 v2

FW: 2.2.3

 

Switch TL-SG2428P v4.0

FW: 4.0.6

 

And a couple of different EAPs 

 

Now after over 10 hours waiting time the switch is still in "ADOPTION" state. 

 

In the DEVICES tab, the switch now appears with a new IP-Adress (192.168.40.248). It doesn't have a public IP-Adress. This field is blank. 

 

What steps can I take to find the error other than resetting the entire setup?

 

I have already tried to factory reset the switch. But this didn't help. 

 

I hope someone can give advice on this topic.

 

 

Thanks a lot. 

 

Patrick

  0      
  0      
#1
Options
1 Accepted Solution
Re:Adoption loop with TL-SG2428P-Solution
2024-01-19 06:24:28 - last edited 2024-01-26 02:42:21

Hi @Patrick8277,

 

What is the IP address of your OC200?

Can the switch TL-SG2428P ping through the OC200?

Please follow this article to do some troubleshooting first.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Adoption loop with TL-SG2428P-Solution
2024-01-19 06:24:28 - last edited 2024-01-26 02:42:21

Hi @Patrick8277,

 

What is the IP address of your OC200?

Can the switch TL-SG2428P ping through the OC200?

Please follow this article to do some troubleshooting first.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 218

Replies: 1

Related Articles