Recommendations for PtP bridge equipment.

Recommendations for PtP bridge equipment.

Recommendations for PtP bridge equipment.
Recommendations for PtP bridge equipment.
2024-07-16 20:29:28 - last edited 2024-07-18 02:39:18
Model: CPE710  
Hardware Version:
Firmware Version:

As you can tell I'm new so bear with me. I need reconmendations on what eqyipment to purchase in order to install a PtP bridge. On the Host side there is an existing TP Link  AX1500. I need to transmit siginal appromaxitly 600' (183M) with a clear line of sight in a rural area. On the client end I need to set up WIFI for internet, streaming, camera system (Arlo), Alexa, etc. I've looked at so much over the last couple of days I'm not sure what I need. I've looked at the CPE710, EP211, N300 and several more. It's gotten confusing. Would someone be so kind as to recomend some bridges and a routers for the client end please?

 

Thank you,

Wade

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Recommendations for PtP bridge equipment. -Solution
2024-07-17 07:57:17 - last edited 2024-07-18 02:39:18

  @OldTexan 

Point-to-point network configuration can be done with either the EAP211 bridge kit or the CPE710 modules. They are both capable of making the connection.When installed, the EAP211 bridge kit can automatically create a link, while the CPE710 requires individual configuration. One ought to be configured as an access point, and the other as a client.
Regarding the router, you have a variety of options, so you can make your own decision.
You can completely understand the product by visiting our official website before making a purchase.

 

EAP211 bridge kit

CPE710

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Recommendations for PtP bridge equipment. -Solution
2024-07-17 07:57:17 - last edited 2024-07-18 02:39:18

  @OldTexan 

Point-to-point network configuration can be done with either the EAP211 bridge kit or the CPE710 modules. They are both capable of making the connection.When installed, the EAP211 bridge kit can automatically create a link, while the CPE710 requires individual configuration. One ought to be configured as an access point, and the other as a client.
Regarding the router, you have a variety of options, so you can make your own decision.
You can completely understand the product by visiting our official website before making a purchase.

 

EAP211 bridge kit

CPE710

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:Recommendations for PtP bridge equipment.
2024-07-17 13:48:03

  @Hank21 

 

Thank you

  0  
  0  
#3
Options