Cpe510

Cpe510

Cpe510
Cpe510
11 hours ago - last edited 2 hours ago
Model: CPE510  
Hardware Version:
Firmware Version:

I have a large farm site which I am installing 3/4 of the CPE510 

 

from main building I set up AP, then as I have no direct line of site to the out building on the farm I need to bounce from main house to across the field, which then has a clear line of site to location 3&4 

 

What is the best way to configure the cpe for this to work corre

  0      
  0      
#1
Options
1 Accepted Solution
Re:Cpe510-Solution
2 hours ago - last edited 2 hours ago

Hi  @Nrisec 

 

How far away is the main building from the farm? If not too far, you can use a long cable to extend the Internet and build an outdoor wifi network on the farm.

 

If it's further than 100 meters, is it possible to install two CPEs highly to avoid the obstacles in between?

How to build a Wireless Network between home and farm using tp-link products

 

Long distance wireless connection concerns when using outdoor access point

 

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Cpe510-Solution
2 hours ago - last edited 2 hours ago

Hi  @Nrisec 

 

How far away is the main building from the farm? If not too far, you can use a long cable to extend the Internet and build an outdoor wifi network on the farm.

 

If it's further than 100 meters, is it possible to install two CPEs highly to avoid the obstacles in between?

How to build a Wireless Network between home and farm using tp-link products

 

Long distance wireless connection concerns when using outdoor access point

 

 

Recommended Solution
  0  
  0  
#2
Options