Windows Clients Can't Connect to WA5210 in AP Mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Windows Clients Can't Connect to WA5210 in AP Mode
Region : UnitedStates
Model : TL-WA5210G
Hardware Version : V1
Firmware Version : 4.4.7 Build 120821 Rel.56860n
ISP :
Windows 7 clients are unable to connect in Access Point Mode. Problem does not affect Mac OS X and iOS devices. The primary Win 7 system I'm testing with is fully patched and can connect to other access points without issue.
Wireless Settings:
Encryption: Problem occurs when encryption is disabled, set to WEP or to WPA-PSK.
DHCP: Problem occurs when DHCP is enabled or disabled (DHCP is enabled on the gateway router with no overlap in range)
Network: 192.168.0.x
AP IP: 192.168.0.254
Gateway: 192.168.0.1
Any suggestions will be appreciated.
Model : TL-WA5210G
Hardware Version : V1
Firmware Version : 4.4.7 Build 120821 Rel.56860n
ISP :
Windows 7 clients are unable to connect in Access Point Mode. Problem does not affect Mac OS X and iOS devices. The primary Win 7 system I'm testing with is fully patched and can connect to other access points without issue.
Wireless Settings:
Encryption: Problem occurs when encryption is disabled, set to WEP or to WPA-PSK.
DHCP: Problem occurs when DHCP is enabled or disabled (DHCP is enabled on the gateway router with no overlap in range)
Network: 192.168.0.x
AP IP: 192.168.0.254
Gateway: 192.168.0.1
Any suggestions will be appreciated.
