Assist in the establishment of a wireless network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Assist in the establishment of a wireless network
Region : UnitedKingdom
Model : TL-WA5210G
Hardware Version : V2
Firmware Version : 4.4.7 Build 120821 Rel.56860n
ISP : Internet satallite TooWay
My friends
I hope you will help me in the work of a wireless network covering the residential area (a radius of 5 km)
I want to create a wireless Internet network
Covering the area (5 km )
The area where the buildings 6 to a maximum of 7 floors (sub-city)
I want to reach the Internet directly to the user's home without costing the user to purchase Alpha Card or the like
For the number of users does not exceed 500 users
Why Use for hardware????
I want you detailed explanation and thank you very much
I thank everyone for their answers
I try to worked a simple network ( radius of 1km Or 800m )
I put point A & Point B
between A and B (destance 2km)
The idea was that Mark broadcasting becomes a ring through point B just to experience
Used
1.Point A = Tp-link TL-WA5210G for As the sender signal ( Mode : Access Point )
Antenna Settings:h
Power:27 dbm max
Mode :11 mbps 802.11b
2.Point B = Tp-link TL-WA5210G for As the recipient signal ( Mode : Repeater ) And I added him TL-ANT2415D 2.4GHz 15dBi Outdoor Omni-directional Antenna
Rise from the earth,
35 m + 5 m pipe = 40m The highest point in the region
Antenna Settings:external
Power:27 dbm max
Mode :11 mbps 802.11b
point 2 recipient signal from 6db onley
But the attempt failed, unfortunately,
Point B gives the Internet in one direction only, and a weak signal stop at a collision Powell barrier
And when ignorant Alantina external
Never operate the network
Please help
Do I use NanoStation Instead of Tp-link TL-WA5210G
And AirMax Omni Instead of TL-ANT2415D 2.4GHz 15dBi Outdoor Omni-directional Antenna
Would you do an excellent network
Note:
Near point B Tower of Mobile Network (at a distance of 20 m)
Pipe used are iron and pipe is a bit fishy
Know possible my order be difficult
But, I hope your experience
You my thanks and gratitude
Model : TL-WA5210G
Hardware Version : V2
Firmware Version : 4.4.7 Build 120821 Rel.56860n
ISP : Internet satallite TooWay
My friends
I hope you will help me in the work of a wireless network covering the residential area (a radius of 5 km)
I want to create a wireless Internet network
Covering the area (5 km )
The area where the buildings 6 to a maximum of 7 floors (sub-city)
I want to reach the Internet directly to the user's home without costing the user to purchase Alpha Card or the like
For the number of users does not exceed 500 users
Why Use for hardware????
I want you detailed explanation and thank you very much
I thank everyone for their answers
I try to worked a simple network ( radius of 1km Or 800m )
I put point A & Point B
between A and B (destance 2km)
The idea was that Mark broadcasting becomes a ring through point B just to experience
Used
1.Point A = Tp-link TL-WA5210G for As the sender signal ( Mode : Access Point )
Antenna Settings:h
Power:27 dbm max
Mode :11 mbps 802.11b
2.Point B = Tp-link TL-WA5210G for As the recipient signal ( Mode : Repeater ) And I added him TL-ANT2415D 2.4GHz 15dBi Outdoor Omni-directional Antenna
Rise from the earth,
35 m + 5 m pipe = 40m The highest point in the region
Antenna Settings:external
Power:27 dbm max
Mode :11 mbps 802.11b
point 2 recipient signal from 6db onley
But the attempt failed, unfortunately,
Point B gives the Internet in one direction only, and a weak signal stop at a collision Powell barrier
And when ignorant Alantina external
Never operate the network
Please help
Do I use NanoStation Instead of Tp-link TL-WA5210G
And AirMax Omni Instead of TL-ANT2415D 2.4GHz 15dBi Outdoor Omni-directional Antenna
Would you do an excellent network
Note:
Near point B Tower of Mobile Network (at a distance of 20 m)
Pipe used are iron and pipe is a bit fishy
Know possible my order be difficult
But, I hope your experience
You my thanks and gratitude
