ES205G port vlan cannot be changed

I added a switch ES205G to Omada, but I can't change its vlan profile.
I have several different VLANs and I cannot choose any other than the default System-VLAN.
What's wrong? Omada version: 5.15.6.7
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Has there been any progress on this issue. I am having the same problem and I am on the latest firmware for all my deivces. If I set the port to all I have no issues accessing the internet and network. If I set the port to "Staff" or "Tech", I loose all connection to the network and the internet. It appears 5.15.8.2 did not fix the issue, I am on 5.15.20.19 and the issue still persists.
- Copy Link
- Report Inappropriate Content
what is the problem? now VLAN on ES205 works the same way as other switches. use switch port all on link port
You must also make sure that the link port is connected to a link with all the VLANs that you will have on the switch.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@awie
1. upgrade controller to 5.15.8.2 or high
2. upgrade firmware switch
Upgrading the controller helped me. Later, a firmware update was released that fixed VLAN errors.
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 1486
Replies: 9
Voters 0
No one has voted for it yet.