TL-WA5210G connection refused from router or other AP after some days
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA5210G connection refused from router or other AP after some days
Region : UnitedKingdom
Model : TL-WA5210G
Hardware Version : V1
Firmware Version : 4.4.8 Build 130502 Rel.61441n
ISP :
Hi,
My system:
Router TD-W8960N --->>>AP TL-WA5210G>>>>><<<<<-- AP TL-WA5210G Client Mode <<<<---Hub for local pc
192.168.0.1 192.168.0.254 192.168.0.253
Static Static Static
DHCP Enabled DHCP OFF DHCP Off
FW 1.1.1120912 FW 4.4.8 130502 FW 4.4.8 130502
Rel.67406 Rel.61441n Rel.61441n
Static IP assigned also from ARP router for the both AP
Problem:
Everything works fine, but after some hours (24/48 hours), I could not connect to the first AP (.254) from any device (pc connected to router .001, pc connected trough AP Client .254), but if I connect directly via WI-FI to .254 I could enter on the setup menu.
These also cause that every pc connected trough an hub connected at the AP Client mode .253, could not obtain IP address from dhcp, and if I set manually I could access internet but could not log-in on the first AP .254.
If Power off the first AP, and turn again on, all works fine but only for some hours as before.
Could you help me?
What I'm missing? Or could be an AP hardware problem?
Thanks
Model : TL-WA5210G
Hardware Version : V1
Firmware Version : 4.4.8 Build 130502 Rel.61441n
ISP :
Hi,
My system:
Router TD-W8960N --->>>AP TL-WA5210G>>>>><<<<<-- AP TL-WA5210G Client Mode <<<<---Hub for local pc
192.168.0.1 192.168.0.254 192.168.0.253
Static Static Static
DHCP Enabled DHCP OFF DHCP Off
FW 1.1.1120912 FW 4.4.8 130502 FW 4.4.8 130502
Rel.67406 Rel.61441n Rel.61441n
Static IP assigned also from ARP router for the both AP
Problem:
Everything works fine, but after some hours (24/48 hours), I could not connect to the first AP (.254) from any device (pc connected to router .001, pc connected trough AP Client .254), but if I connect directly via WI-FI to .254 I could enter on the setup menu.
These also cause that every pc connected trough an hub connected at the AP Client mode .253, could not obtain IP address from dhcp, and if I set manually I could access internet but could not log-in on the first AP .254.
If Power off the first AP, and turn again on, all works fine but only for some hours as before.
Could you help me?
What I'm missing? Or could be an AP hardware problem?
Thanks