AP access in Client mode

AP access in Client mode
AP access in Client mode
2014-05-13 15:58:34
Region : UnitedKingdom

Model : TL-WA7210N

Hardware Version : V2

Firmware Version : latest

ISP :


Have my TL-WA7210N working fine in client mode with IP allocated by WISP or other WAP.

I am connecting the AP to the WAN port of my original router and the client(s) to a LAN port on the original router's 192.168.0.x sub-net. When operating in this mode I am then unable to access the AP configuration pages at 192.168.0.254 as this is now behind the original router's WAN port. Changing the AP IP address to 192.168.1.254 (ie a different sub-net from the original router WAN) still does not allow access. Also cannot access the AP on the allocated 'Gateway IP address'.

Need to access the AP without disconnecting from WAN port in order to reconfigure and change password and use survey to find best wireless signal. Any ideas?

Thanks

Mike
0
0
#1
Options
2 Replies
Re:AP access in Client mode
2014-08-03 15:58:55
me too... :( -up
0
0
#2
Options
Re:AP access in Client mode
2014-08-03 16:22:13

MikeOld wrote


Have my TL-WA7210N working fine in client mode
I am connecting the AP to the WAN port of my original router and the client(s) to a LAN port on the original router'

I m amaze that it works
Client mode is a wireless connection, not a cable one as you post
0
0
#3
Options