Universal repeater mode NOT WORKING !!! Devices cannot connect to the WA7210N
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Universal repeater mode NOT WORKING !!! Devices cannot connect to the WA7210N
Region : Italy
Model : TL-WA7210N
Hardware Version : V2
Firmware Version :
ISP : TISCALI
Hello, I'm having an issue with my new TP LINK TL-WA7210N mode operation: UNIVERSAL REPEATER.
I need to exted my wireless signal between 2 buldings which are 40 meters far. After the configuration it seems that everything is ok but when I try to connect a smartphone or pc to the extended wireless of the WA7210N in the 2nd building I'm unable to connect. It says that the connection is limited. Of course the main wireless in the main bulding is working 100%.
What can I do ? Could it be the ip ? It is: 192.168.0.254
I specify that wireless connection is good but internet connection is off. :( :(
Model : TL-WA7210N
Hardware Version : V2
Firmware Version :
ISP : TISCALI
Hello, I'm having an issue with my new TP LINK TL-WA7210N mode operation: UNIVERSAL REPEATER.
I need to exted my wireless signal between 2 buldings which are 40 meters far. After the configuration it seems that everything is ok but when I try to connect a smartphone or pc to the extended wireless of the WA7210N in the 2nd building I'm unable to connect. It says that the connection is limited. Of course the main wireless in the main bulding is working 100%.
What can I do ? Could it be the ip ? It is: 192.168.0.254
I specify that wireless connection is good but internet connection is off. :( :(
Re:
OK, I will change my root 7210n device, with IP of 192.168.0.253, subnet mask 255.255.255.0, channel 6, (main building) from "AP Router" mode to "AP" mode, but leave it connected to my cable modem via . Do I understand this part correctly?
Now I have line of sight at approx 450 feet apart.
Now at my 2nd building I need to set my second 7210n IP is 192.168.0.254, to the "client" mode? Then set it's channel to same as root, use gateway IP from ISP modem? (root is already using it) and disable DHCP on both 7210Ns?
Thank you for the help!
Now I have line of sight at approx 450 feet apart.
Now at my 2nd building I need to set my second 7210n IP is 192.168.0.254, to the "client" mode? Then set it's channel to same as root, use gateway IP from ISP modem? (root is already using it) and disable DHCP on both 7210Ns?
Thank you for the help!