Business Community > Pharos Wireless Bridges > How to use one SSID for 3 TL-WA7210N in an array
< Pharos Wireless Bridges

How to use one SSID for 3 TL-WA7210N in an array

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to use one SSID for 3 TL-WA7210N in an array

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to use one SSID for 3 TL-WA7210N in an array
How to use one SSID for 3 TL-WA7210N in an array
2015-05-26 19:52:08
Region : Argentina

Model : TL-WA5210G

Hardware Version : V2

Firmware Version :

ISP :

Hi all

I have 3 TL-WA7210N i want to use one SSID for all the TL-WA7210N in an array.

1.How best do i mount the NSM2 in an array

my network setup is
internet,Billing Server,ADSL modem,8 port switch and 3 NSM2 .
2.how do i configure TL-WA7210N to have on SSID


my client use Notebook/mobile PC to access my internet.

in futuer i will like to expand my network by adding more NSM2s using PTM


and example for mounting my TL-WA7210N is in the pic
  0      
 
  0      
 
#1
Options
5 Reply
Re:How to use one SSID for 3 TL-WA7210N in an array
2015-05-27 10:04:31
Hang AP1, AP2, AP3 on a hight place, the each AP faces different directions.

Log into the management page and configre:
Access point mode
Wireless channel width: 20MHz.
Channel 1, 6, 11 on AP1, AP2, AP3
Wireless settings --> distance setting, set the distance value.


There must not be any obstructions, obstructions will block signal and cause low performance.
  0  
  0  
#2
Options
How to use one SSID for 3 TL-WA7210N in an array
2015-05-28 02:47:20

Tobacco wrote

Hang AP1, AP2, AP3 on a hight place, the each AP faces different directions.

Log into the management page and configre:
Access point mode
Wireless channel width: 20MHz.
Channel 1, 6, 11 on AP1, AP2, AP3
Wireless settings --> distance setting, set the distance value.


There must not be any obstructions, obstructions will block signal and cause low performance.


thank you for this information.do u know how i can do same for ubiquiti nanostation M2
  0  
  0  
#3
Options
Re:How to use one SSID for 3 TL-WA7210N in an array
2015-05-28 08:07:26

atoivan wrote

how i can do same for ubiquiti nanostation M2

default the NM2, by default is Access Point, turn off Airmax, and dont use AP-WDS rest is exactly the same.
make sure your array in not this umbrella https://www.youtube.com/watch?v=sCfXgtyceYg&feature=youtu.be
  0  
  0  
#4
Options
Re:How to use one SSID for 3 TL-WA7210N in an array
2015-09-16 23:50:21
Why is any thing wrong with the setup in the video
  0  
  0  
#5
Options
Re:How to use one SSID for 3 TL-WA7210N in an array
2015-09-17 07:49:00
I posted on 05-28-2015 00:07
You answered on 09-16-2015 15:50
If after months you still don't know, don't forget, ignorance is bliss
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 699

Replies: 5

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.