2xTL-WA710N Internet transfer
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
2xTL-WA710N Internet transfer
Region : Greece
Model : TL-WA7210N
Hardware Version : V2
Firmware Version : TL-WA7510N_V1_130427
ISP : OTE Greece VDSL
Good Evening,
I desperately need your help in the following problem.
I bought two TL-WA710N antennas in order to expend the internet network to 150-200 meters.
What I want to do is to connect one antenna to a LAN port of the VDSL Router and as I read in the manual I have to set it up as a Standart AP --> Access Point.
I did the same to the other antenna, and from the antenna I took an ethernet cable and connected to a tp-link switch. From the switch I took two cables one for a DVR an the other a Ubiquiti antenna.
The Ubiquiti antenna is for internet sharing throught WiFi in a 1000 square meters area and for about 50-100 clients (Swimming pool).
The problem is that when I connect my laptop to the TP-Link switch I don't have internet access althought I have access to the other network devices (VDSL Router, Two Antennas).
When I connect throught Wifi to the Ubiquiti antenna I have internet access to my laptop but not in my Samsung Galaxy S3 smartphone. I also can't connect with any other devices. (IPhone5, Dell laptop, HP laptop).
Both the other laptops connect to the Ubiquiti antenna and they say that they have internet access and after a few seconds they don't and then they have and then not again.
But the main problem is that I can't share internet through the Ethernet Switch wit ethernet cable.
The connection between the two antennas doesn't seem to fail.
The IP of the VDSL router is 192.168.2.1 and I use it as a DNS to both the antennas.
The antennas IP's are 192.168.2.105 and 192.168.2.106. (I work them as static IP with Subnet 255.255.255.0 and DNS 192.168.2.1)
I activate the DHCP and the range is between 192.168.2.10 - 192.168.2.199.
I disabled the DFS and checked for the latest firmware.
I disabled the WiFi security and I don't broadcast the SSID.
I use a specific channel (same for both), Mode: 11NA HT20 and Max Tx Rate 52Mbs.
Please let me know if I am doing something wrong.
Thank you in advance.
Thank you in advance
Model : TL-WA7210N
Hardware Version : V2
Firmware Version : TL-WA7510N_V1_130427
ISP : OTE Greece VDSL
Good Evening,
I desperately need your help in the following problem.
I bought two TL-WA710N antennas in order to expend the internet network to 150-200 meters.
What I want to do is to connect one antenna to a LAN port of the VDSL Router and as I read in the manual I have to set it up as a Standart AP --> Access Point.
I did the same to the other antenna, and from the antenna I took an ethernet cable and connected to a tp-link switch. From the switch I took two cables one for a DVR an the other a Ubiquiti antenna.
The Ubiquiti antenna is for internet sharing throught WiFi in a 1000 square meters area and for about 50-100 clients (Swimming pool).
The problem is that when I connect my laptop to the TP-Link switch I don't have internet access althought I have access to the other network devices (VDSL Router, Two Antennas).
When I connect throught Wifi to the Ubiquiti antenna I have internet access to my laptop but not in my Samsung Galaxy S3 smartphone. I also can't connect with any other devices. (IPhone5, Dell laptop, HP laptop).
Both the other laptops connect to the Ubiquiti antenna and they say that they have internet access and after a few seconds they don't and then they have and then not again.
But the main problem is that I can't share internet through the Ethernet Switch wit ethernet cable.
The connection between the two antennas doesn't seem to fail.
The IP of the VDSL router is 192.168.2.1 and I use it as a DNS to both the antennas.
The antennas IP's are 192.168.2.105 and 192.168.2.106. (I work them as static IP with Subnet 255.255.255.0 and DNS 192.168.2.1)
I activate the DHCP and the range is between 192.168.2.10 - 192.168.2.199.
I disabled the DFS and checked for the latest firmware.
I disabled the WiFi security and I don't broadcast the SSID.
I use a specific channel (same for both), Mode: 11NA HT20 and Max Tx Rate 52Mbs.
Please let me know if I am doing something wrong.
Thank you in advance.
Thank you in advance
