Business Community > Pharos Wireless Bridges > WA7210N AP cannot communicate to another WA7210N (CLIENT)
< Pharos Wireless Bridges

WA7210N AP cannot communicate to another WA7210N (CLIENT)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WA7210N AP cannot communicate to another WA7210N (CLIENT)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WA7210N AP cannot communicate to another WA7210N (CLIENT)
WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-04 06:15:00
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi there TPLINK wireless experts, can someone advise why I cannot connect 7210N CLIENT MODE to another 7201N in AP mode?
The RSSI varies from 18dB to 20dB yet they cannot talk to each other. Antenna alignment is ok. Both have FW version 140730. Internet cannot passthrough from AP to CLIENT and cannot be PING either in both directions.
Distance is 3.5Km with very clear LOS, Point A is 100ft, while Point B is 380ft.
Can they be connected in different operation mode, except AP-CLIENT?
PLease advise.

Thank you.
  0      
 
  0      
 
#1
Options
5 Reply
Re:WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-04 06:49:17

vinoswald wrote

why I cannot connect 7210N CLIENT MODE to another 7201N in AP mode
Can they be connected in different operation mode, except AP-CLIENT?

strange question coming from you.
Yes it can be linked, WISP mode (aka AP-Client-Router), but that will be a repeating mode, I dont advise.
On the other side, if you cant to AP-Client, the easiest and best mode, means you have a issue, you need to norrow down the issue.
post info.
Gateway from ISP router
IPs from AP & Client
AP-SSID
Screen shot from the Client survey.
and last, can you connect with any wireless device to AP and surf the Web
  0  
  0  
#2
Options
Re:WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-05 01:26:44

Darren wrote

seems like you failed to make a connection between these two 7210N

I hope, the title of the thread has a typo mistake
WA7210N AP cannot communicate to another WA7210N (CLIENT)
APs dont link to Clients its the opposite Clients link to AP
  0  
  0  
#4
Options
Re:WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-05 05:47:34
Thanks Darren for the vital infos. I have found out that the other unit has a problem. I set it back to factory setting, yet, not working. I upgraded it to latest firmware, still not working.
  0  
  0  
#5
Options
Re:WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-05 05:48:44
Hi DANYMARC, well said!. its sort of elaborating further my problems.;)
  0  
  0  
#6
Options
Re:WA7210N AP cannot communicate to another WA7210N (CLIENT)
2015-08-09 08:14:15

Darren wrote

Is it a new problem with another WA7210N? What do you mean by not working, not available to connect with any other AP? Is it working well before? I am a little confused with this...
BTW, have you fixed the previous connection issue?

Yes, its same problem. Actually, they are connecting already (AP-CLIENT), they have same FW version. RSSI is ok. Antenna Alignment is ok, almost 60%. Yet, no traffic in betwene them. I cannot do PING TEST either of the way.
This problem hasn't been resolved yet. Very strange. Beforehand, the CLIENT is an older version of FW. But now that they have same FW, still not working.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 810

Replies: 5

Related Articles
 How to connect a TL-WA7210N in AP mode to a TL-WA7510N
919 0
TL-WA7210N no signal and other issues
134 0
 Tl-wa7210n
1330 0
 Tl-wa7210n
1019 0
 TL Wa7210N probems in connection AP mode
3602 0
 Extending an Existing Outdoor AP (TL-WA7210N)
1615 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.