P2P TL-WA5210G vs CPE510
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Re:P2P TL-WA5210G vs CPE510
I want to choose "Antenna settings"!!!!!!!! I cant find something like on 5210
cpe510 has 2 antennas, I want to use vertical one. Firmware in 510s was 1.0.0 I flashed them with 1.2.1 because on 1.0.0 there is no gateway so they couldnt get time from NTP, and maybe thats why now I cant choose antena and turn off horisontal one.
BTW.... 4920-6080MHz is seem to be covered with -60 to -30dBm on client spot(Spectrum Analisis), no gaps at all. Tommorrow I'll mount AP but it seems that link wouldnt work, it's too crowded. I didnt beleive to my friend who told me that all providers mounted 5GHz links 2 or more years ago. There are almost 100 networks on 2,4GHz but I see more than 250 on 5GHz and a lot of providers' (18 different providers here) links with -67 to -50dBm(Survey). I know that one provider mount more than 20 MikroTik NetMetal5 2000mW routers on my and two close buildings few months ago.
I'll try cpe510 link tommorrow when I mount AP on other location. I started mounting client after work and it seems that days are not so long. I'll try but it seems that I will stay on 5210. :(
cpe510 has 2 antennas, I want to use vertical one. Firmware in 510s was 1.0.0 I flashed them with 1.2.1 because on 1.0.0 there is no gateway so they couldnt get time from NTP, and maybe thats why now I cant choose antena and turn off horisontal one.
BTW.... 4920-6080MHz is seem to be covered with -60 to -30dBm on client spot(Spectrum Analisis), no gaps at all. Tommorrow I'll mount AP but it seems that link wouldnt work, it's too crowded. I didnt beleive to my friend who told me that all providers mounted 5GHz links 2 or more years ago. There are almost 100 networks on 2,4GHz but I see more than 250 on 5GHz and a lot of providers' (18 different providers here) links with -67 to -50dBm(Survey). I know that one provider mount more than 20 MikroTik NetMetal5 2000mW routers on my and two close buildings few months ago.
I'll try cpe510 link tommorrow when I mount AP on other location. I started mounting client after work and it seems that days are not so long. I'll try but it seems that I will stay on 5210. :(
Re:P2P TL-WA5210G vs CPE510
Well I became MSc in electrical engineering & computer science a long time ago in 1994. so a lot of news from then. Ty,for MIMO, I will study this new design.
Whole range 4920 MHz to 6100 MHz is soo crowded I'll post pictures when I finish.
Well I had an hour today to go to AP location and I mounted it there, now I am at client location, but not so happy. It seems that locations and directions of old devices were the best for new devices. I am surfing through new link now. I have 55-65 Mb/s with two cpe510. Yes it is faster than 15 Mb/s with 5210 but distance is only 2 km OK more, but it's less than 3 km straight line. Tomorrow I will tweak parameters and I expect to get some Mb/s more. I'll documented whole project with pictures and tips I found for a few days. Ping is OK 1-2ms, 1,3ms average.
I limited internet speed to 50Mb/s for this subnet so it works, but I need more than 60Mb/s for file transfer and games through my wireless LAN. I have giga LAN on boat locations so this speed seem so slow.
Old devices, after 5 years.I didnt clean them. They are clean because they actually have never been outdoor, they have been protected from rain and direct sunlight
