CPE510 and Edimax
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.CPE510 and Edimax
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-09-25
2015-09-29 17:29:16
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-09-25
CPE510 and Edimax
2015-09-29 17:29:16
Tags:
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi All
Have setup a CPE510 and trying to get a Edimax 5Ghz router setup as a WISP client to connect to it. However when I login to the Edimax it can't see the CPE510 but it can see routers in the 2.4Ghz range.
My laptop and tablet can see the CPE510 fine but the Edimax can't.
Currently the CPE510 is on channel 136.
Any and all help welcome.
Thanks
David
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi All
Have setup a CPE510 and trying to get a Edimax 5Ghz router setup as a WISP client to connect to it. However when I login to the Edimax it can't see the CPE510 but it can see routers in the 2.4Ghz range.
My laptop and tablet can see the CPE510 fine but the Edimax can't.
Currently the CPE510 is on channel 136.
Any and all help welcome.
Thanks
David
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
5 Reply
Posts: 227
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2015-08-31
Re:CPE510 and Edimax
2015-09-29 20:05:28
According to your description, it seems you have mistaken the router to be working in 5GHz.
What's more, channel 136 is a DFS channel. Once there is radar signal, CPE510 will stop broadcast its SSID and during this time, you can't detect it.
What's more, channel 136 is a DFS channel. Once there is radar signal, CPE510 will stop broadcast its SSID and during this time, you can't detect it.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-09-25
Re:CPE510 and Edimax
2015-09-30 15:58:43
Hi
Thanks for responding.
The Edimax Router is dual band and so supports both, 2.4Ghz and 5Ghz. While I understand that channel 136 is a DFS channel, for the UK the CPE510 doesn't support anything else.
Thanks
Thanks for responding.
The Edimax Router is dual band and so supports both, 2.4Ghz and 5Ghz. While I understand that channel 136 is a DFS channel, for the UK the CPE510 doesn't support anything else.
Thanks
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 227
Helpful: 3
Solutions: 0
Stories: 0
Registered: 2015-08-31
Re:CPE510 and Edimax
2015-09-30 16:18:47
You can try to do the below trouble shooting:
1. Configure your Edimax Route in the 5GHz and then use your laptop and tablet to connect to it. In this way you can check if the 5GHz wireless adapter is broken.
2. Wired connect the router to internet to confirm it's not a defect unit.
3. Reset the CPE510, choose test_mode, setup it as an access point, 802.11a/n mode, 40MHz channel, no password needed. Configure the same setting in your router before detecting the AP.
1. Configure your Edimax Route in the 5GHz and then use your laptop and tablet to connect to it. In this way you can check if the 5GHz wireless adapter is broken.
2. Wired connect the router to internet to confirm it's not a defect unit.
3. Reset the CPE510, choose test_mode, setup it as an access point, 802.11a/n mode, 40MHz channel, no password needed. Configure the same setting in your router before detecting the AP.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 96
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2015-08-31
Re:CPE510 and Edimax
2015-09-30 17:10:27
Make sure your
[COLOR=#333333]Edimax Router supports channel 136, and double check the channel width settings on both CPE510 and
Edimax Router.
Besides, as stupidbird mentioned, select test_mode instead of UK, you will be able to choose other channels, you can try with this if your Edimax Router doesn't support channel 136...while please pay attention to your local laws.
Besides, as stupidbird mentioned, select test_mode instead of UK, you will be able to choose other channels, you can try with this if your Edimax Router doesn't support channel 136...while please pay attention to your local laws.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 981
Helpful: 10
Solutions: 0
Stories: 0
Registered: 2013-01-07
Re:CPE510 and Edimax
2015-09-30 21:45:44
@kintel post#1 lacks of info. the reason Tp-Link released firmware 1.3.0 is to make 510 work with more brands, upgrade 510 to latest firmware here
http://forum.tp-link.com/showthread.php?82073-TP_PharOS_1.3.0_150807_Beta-add-CDP-Radius-MAC-Auth-and-compatible-with-MikroTik.&p=165006&viewfull=1#post165006 do not select country in settings, select Test Mode
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-09-25
2015-09-29 17:29:16
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-09-25
Information
Helpful: 0
Views: 895
Replies: 5
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message