TL-SG105E Management VLAN for switch's dhcp client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG105E Management VLAN for switch's dhcp client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG105E Management VLAN for switch's dhcp client
TL-SG105E Management VLAN for switch's dhcp client
2015-10-17 09:40:33
Hardware Version : V1

Firmware Version : Most recent


I am trying to setup the SG105E using its built-in DHCP client.

During testing, using 802.1q to partition the switch into 5 separate VLAN domains (one per port),
it seems the switch will broadcast a dhcp address request for itself on any of the five ports.

There does not seem to be a way to limit the request to a specific VLAN.

If each VLAN had its own dhcp server, this would cause all the dhcp servers to respond to the request.

What seems to be missing is a VLAN management ID.

Any ideas?
  0      
  0      
#1
Options