Distance setting in TL-WA7210N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Distance setting in TL-WA7210N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Distance setting in TL-WA7210N
Distance setting in TL-WA7210N
2015-11-17 11:09:51
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

as per datasheet Tl-WA7210N Coverage Range is 5+ kms but i am getting only 200 meters in open air.

request to suggest setting to tune the AP to 5+kms coverage.
  0      
  0      
#1
Options
2 Reply
Re:Distance setting in TL-WA7210N
2015-11-18 06:50:15

trameshbabu wrote

Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

as per datasheet Tl-WA7210N Coverage Range is 5+ kms but i am getting only 200 meters in open air.

request to suggest setting to tune the AP to 5+kms coverage.


Use parabolic antennas.

Build-in antenna in the WA-7210 is not suitable for long distance point-to-point, it is only suitable for short distance or multi-user.
  0  
  0  
#2
Options
Re:Distance setting in TL-WA7210N
2015-11-20 14:19:07
datasheet doesn't promise every scenario.

My installation is 3.4Km PTP, clear LOS but there are some other 2.4GHz signals around. In my case I get a throughput of 20Mbps.

Interference and observation always matters.

As the wireless network administrator you need to create conditions and overcome the physical difficulties in order to achieve better performance.

You can use external antennas such as TL-ANT2424B (pigtail cables needed). You can also switch to 5GHz CPE510. This model performs much better as a 5GHz AP.
  0  
  0  
#3
Options