ACL Extended
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ACL Extended
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello list, I have a switch TP-LINK TL-SG3424P model, and the firmware version is 1.0.7 Build 20141219 Rel.33340(s)
I want to start using extended ACLs that come there, but I have a doubt I want to create the following rules
I want Allow ICMP from this network segment 172.18.68.32/255.255.255.224 to the host 172.18.68.8 and create another rule that denies all ICMP traffic that does not meet the above condition.
As much as I've always tried or blocks or allows, but I can not create these conditions.
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello list, I have a switch TP-LINK TL-SG3424P model, and the firmware version is 1.0.7 Build 20141219 Rel.33340(s)
| [/TD] [TD="class: LNORMAL"] |
[/TD] [TD="class: LNORMAL_LAST"] |
I want to start using extended ACLs that come there, but I have a doubt I want to create the following rules
I want Allow ICMP from this network segment 172.18.68.32/255.255.255.224 to the host 172.18.68.8 and create another rule that denies all ICMP traffic that does not meet the above condition.
As much as I've always tried or blocks or allows, but I can not create these conditions.
