@Dr2Omalpalli Just to confirm, are you trying to get a second ISP for redundancy purposes (like WAN failover) or for Load Balancing purposes? If so, yes, the Festa gateway you linked should be just fine for that. 

A typical office network setup has the ISP device (modem) either with a built-in router or connected to an external router that does the actual routing of the network. 

With this in mind, yes, you can connect two ISP devices to the WAN ports of the Festa and connect your Archer AX10s to the LAN ports, but if you have more info about what you'd like to accomplish or any features you need specifically, I'm happy to advise.

  @Dr2Omalpalli Thank you for your reply, NeilR_M. 

Just to clarify: The broadband cable coming from my ISP looks like an Ethernet cable.

However, I'm not sure if this external line is post-modem, or whether our main AX10 is handling modem duties internally.

Our current Configuration:

The external ISP line is attached to the WAN port on the Main TP-Link AX10.

From its LAN ports, 3 Ethernet cables connect to 3 Satellite AX10s, placed in different places in the house.

Our Goal:

Get another ISP, and create a network that aggregates both ISPs, and make the EasyMesh:

1. Faster
2. More robust (if one of the ISPs goes down, the other should still be working)
3. Share Data so we get an increase in the Data Limit.

Would the following system work?

• Connect the two External ISP cables to two WAN ports on the Festa FR307-M2
• Place all four AX10s in different places in the house and connect them to WAN/LAN ports of the Festa
• Setup EasyMesh on the AX10s

In case the ISPs are not providing a modem output:

Do we need something like the TP-Link ER707-M2 Omada Multi-Gigabit VPN Gateway?

I was told Omadas don't need a separate modem on their WAN ports.

Or would the Festa WAN ports be able to handle this issue?

Thanks much for your help.

Regards,

Rajnesh