My EAP´s shows up strange in the network map and strange retried rate.
I have a ER-707-M2 V1.2, OC300, EAP650, EAP653 and unmanaged tp-link switches.
The network map is really weird. One on the EAP does not show itself as a part of the network. And sometimes both show themselves like connected before the gateway. Although when it says that their uplink is from ER707-M2.
Also the Retried rate widget shows strange values. I can´t say that i have an actual issue with my network but i just find it strange and it does not show up like it is configured.
Retried rate might not be anything to bother with.
I used to have my controller in an LXC container in proxmox but i got this OC300 for dirt cheap so ithough id make the switch. So i hae been using the OC300 for a month or so.
Any ideas on what i am missing here. Any config that have been missed because it looks very strange to me.
Attaching some pictures.
Hi @jonas740
Thanks for posting here.
For the topology concern, please have a look at the following post.
Troubleshooting Topology in Controller Is Not Recognized Properly
One more point, please make sure the EAP LLDP option is enabled.
Also the Retried rate widget shows strange values
>>>I don't see anything strange, which value do you expect they are?
Hi @jonas740
Thanks for posting here.
For the topology concern, please have a look at the following post.
Troubleshooting Topology in Controller Is Not Recognized Properly
One more point, please make sure the EAP LLDP option is enabled.
Also the Retried rate widget shows strange values
>>>I don't see anything strange, which value do you expect they are?
Well when I had my controller running on a LXC proxmox container it never showed up like this.
My OC300 is connected directly to my gateway ER707-M2.
Regarding retrieis rate, it has been worse. It has been up in the reds.
One AP stays low while the other is about 20%.
I just don't see that as normal.
Today the network map looks different.
And I have noticed that my smart home devices randomly loose connection. 
Yea I have rebooted everything quite a few times.
I have not had the EAP650 that long. Couple of weeks maybe. Had a EAP610 before together with my EAP653.
And i added the OC300 at the same time as I added that EAP.
Also my Gateway ER707-M2 is also quite new. Maybe 1.5 month old.
When checking I have 26 devices on EAP650 and 20 devices on EAP653
And now the network looks like this, but it could change itself to look different later today. I have not rebooted for this to change.
