Business Community > Video Recorders > Onvif compatibility for NVR
< Video Recorders

Onvif compatibility for NVR

Onvif compatibility for NVR

Onvif compatibility for NVR
Onvif compatibility for NVR
Sunday
Model: VIGI NVR2008H-8MP  
Hardware Version: V2
Firmware Version: 1.5.1 Build 251211 Rel.73851n

I have tried a VIGI S355 and I'm impressed, so decided to give its NVR a go. (cloud VMS service is nice too)
But current cameras do not have high sensibility, so decided to use a couple of Hikvision DS-2CD2087G3-LI2UY (.0005 lux + new generation detection)
Sadly, the mix seems not to be working that good. The NVR has a menu for basic events and another for smart events, and some logic filters which cameras (channels)
are able to be used for smart event categories (Human/Vehicle/Intrusion/... detection).
These cameras only show in intrusion detection, but even so, when I try to apply a configuration, the apply button is disabled. Even the selection does not work.

Is there a way to have a ws event  to trigger recording ?
The NVR does have full time or event based recording schedules, the cameras are generating the events, just need a way to link those...

TIA
-Carlos

  0      
 
  0      
 
#1
Options
4 Reply
Re:Onvif compatibility for NVR
Monday

Hi  @tronar 

If you use the third party camera with the NVR, then they can only use the motion detection due to ONVIF profile S protocol.

Regarding the grey buttion, it would be much appreciated if you could provide any screenshot.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Onvif compatibility for NVR
Monday

Hi  @Hank21 , thank you for your reply.

Does that mean that the NVR does not support profile T ?

Is there any way to soft trigger an event to the NVR then ?

Please see attached pic where smart event intrusion configuration channel selector "offers" both cameras but considers them as invalid.NVR event config

  0  
  0  
#3
Options
Re:Onvif compatibility for NVR
Tuesday

Hi  @tronar 

That is correct as the VIGI NVR only supports ONVIF profile S currently with third party cameras, causing the IPC can only use basic features including motion detection and camera tampering.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:Onvif compatibility for NVR
Tuesday

  @Hank21 That's a lame excuse, not to call it a bug ?

Protocols are there to support integration. To support a protocol just for same brand devices... is like doing "your own protocol" and abusing the name ?

Anyways, I'll end up putting an arduino to receive the camera alarm via webhook and close an alarm contact.

Hope the NVR does recognize the S355 alerts though. I'll soon discover...

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 77

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.