TL-SG2210P freezed
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG2210P freezed
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi to all,
I had a problem on 2 TL-SG2210P switch.
Just purchased (the second as substitute of the first), I updated their fw with 1.0.3_ version [20150928-rel34962] downloaded from TPLINK site.
The problem, identical for both, was the following:
As usual, every night, I turn off the devices of my LAN and then turn them on again the next morning. Instead both switches (the first after a week, the second after a month) are suddenly stuck; It just turns on the "power" LED while the other LEDs remain off. The reset button did not work and the switches have become unreachable from the web and telnet.
Now I'm waiting for further replacement units (same model) from Amazon but I would like to know why this problem occurred for 2 times on 2 different units of the same model and how to prevent the recurrence of the anomaly on the next I will receive.
Thanks :) .
BR
Simone
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi to all,
I had a problem on 2 TL-SG2210P switch.
Just purchased (the second as substitute of the first), I updated their fw with 1.0.3_ version [20150928-rel34962] downloaded from TPLINK site.
The problem, identical for both, was the following:
As usual, every night, I turn off the devices of my LAN and then turn them on again the next morning. Instead both switches (the first after a week, the second after a month) are suddenly stuck; It just turns on the "power" LED while the other LEDs remain off. The reset button did not work and the switches have become unreachable from the web and telnet.
Now I'm waiting for further replacement units (same model) from Amazon but I would like to know why this problem occurred for 2 times on 2 different units of the same model and how to prevent the recurrence of the anomaly on the next I will receive.
Thanks :) .
BR
Simone
