Business Community > Switches > The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
< Switches

The device does not support the 802.1p Priority and Trust Mode configured in this configuration...

The device does not support the 802.1p Priority and Trust Mode configured in this configuration...

The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
Yesterday
Model: SG2210MP  
Hardware Version: V4
Firmware Version: 4.20.20 Build 20260310 Rel.10715
Hello, I've adapted a new switch SG2210MP v4.2 (4.20.20 Build 20260310 Rel.10715) to an Omada controller and I see this message: 

The device does not support the 802.1p Priority and Trust Mode configured in this configuration entry. Other functions of the entry can take effect normally. (all ports)

The switch has the latest firmware. What does this mean and how can I fix it? Thank you for your help.

  0      
 
  0      
 
#1
Options
4 Reply
Re:The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
Yesterday

  @KajtekKajtek Thanks for your post, what that error code means is that there is a configuration on your switch that isn't supported; I do see that that specific model should support 802.1p, so it might be a specific combination of settings. Can you please provide a screenshot of your 802.1p Priority and Trust Mode settings for this device? 

  0  
  0  
#2
Options
Re:The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
Yesterday

  @NeilR_M 

Can you help to find this settings in Omada controller 6.0.0.25 ? I made factory reset before adopting. In standalone mode I saw this settings. Thank you.

  0  
  0  
#3
Options
Re:The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
Yesterday

  @KajtekKajtek 

All ports are default profile ALL. Priorytet 802.1p = 0, trust mode = untrusted.

  0  
  0  
#4
Options
Re:The device does not support the 802.1p Priority and Trust Mode configured in this configuration...
18 hours ago - last edited 18 hours ago

  @KajtekKajtek 

 

I use SG2008 switches here and I used to see that message when I was using older firmware. With the latest pre-release firmware for the switches, I no longer see it. In fact, the settings for the 802.1p priority and trust mode no longer appear in the Port Profile section of the controller with its latest firmware release.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop 1x EAP772-Outdoor
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 82

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.