Multipoint with CPE510 and TL-WA801ND POE questions?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Multipoint with CPE510 and TL-WA801ND POE questions?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multipoint with CPE510 and TL-WA801ND POE questions?
Multipoint with CPE510 and TL-WA801ND POE questions?
2016-06-28 22:39:52
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello,

Two questions on CPE510 multipoint setup & POE in a holiday cottage scenario.

Not clear on this can I setup 3 CPE510's in a Point-to-Multi-point arrangement?

IE Unit 1 as and AP

Units 2 & 3 as Client Stations?

Or do I set them as Bridges? But then surely it would be a point-2-point setup. Which is no good as I have two client station ends.
In both case's Id use Pharos MAXtream so users at the client ends would not 'see' the Outdoor AP's!





The Client units would in turn connect to an indoor access-point like TL-WA801ND model for the client side internal access.

POE: So all these devices are POE capable. At the client end the CPE510 will be POE and it is likely that the TL-WA801ND would also benefit from POE deployment.

Will the POE arrangement like this work? Or do I need a router switch before the TL-WA801ND?



File:
MP example.jpgDownload
  0      
  0      
#1
Options
6 Reply
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-06-29 07:12:29

sjgnet wrote

Two questions on CPE510

1-yes
2-no
  0  
  0  
#2
Options
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-06-29 17:57:02
You can set one CPE510 in AP mode and the other two in Client mode for PtMP topology.
Enable MAXtream others could also see your AP but couldn't connect to it. For your requirement you should disable the Broadcast SSID option on AP unit.
  0  
  0  
#3
Options
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-06-30 16:43:06
hi Danymarc.

Are you saying that I cant do Point to Multi-Point?
  0  
  0  
#4
Options
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-07-01 03:03:41

sjgnet wrote

hi Danymarc, Are you saying that I cant do Point to Multi-Point?

I ansewred, @bird answered with a small tuto, what also you need
  0  
  0  
#5
Options
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-07-01 21:31:26

stupidbird wrote

You can set one CPE510 in AP mode and the other two in Client mode for PtMP topology.
Enable MAXtream others could also see your AP but couldn't connect to it. For your requirement you should disable the Broadcast SSID option on AP unit.


Ok thanks thats fine understand that, what about how I plan to connect the TL-WA801ND Access-points and the POE injectors?
  0  
  0  
#6
Options
Re:Multipoint with CPE510 and TL-WA801ND POE questions?
2016-07-02 08:18:52

sjgnet wrote

what about how I plan to connect the TL-WA801ND Access-points and the POE injectors?

If you can write obvious you can read, the answer is in post #2
I posted, what also you need, if you want the why's, ask like why can't I use the POE from the Pharos, you have the answer in your hands different voltages check the specs of the 2 devices, and if that's not the case surf Tplink web and check the specs and you will read the dif.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2006

Replies: 6

Related Articles