Help can't Reset sg3424p with hyperterminal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Help can't Reset sg3424p with hyperterminal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Help can't Reset sg3424p with hyperterminal
Help can't Reset sg3424p with hyperterminal
2016-06-29 16:52:05
Model :

Hardware Version :

Firmware Version :

ISP :

Hi all, i have a tplink sg3424p and i need to reset him....i've tried with the hyperterminal but i can't comunicate with him...Can anyone help me? I must use only hyperterminal? Thanks
File:
P60629-102856.jpgDownload
P60629-102842.jpgDownload
  0      
  0      
#1
Options
3 Reply
Re:Help can't Reset sg3424p with hyperterminal
2016-09-03 11:16:26
Hope this FAQ can help you.
  0  
  0  
#2
Options
Re:Help can't Reset sg3424p with hyperterminal
2017-01-15 15:48:48
I got the same problem with an SG3216v2 and an SG3424v1.
Ican get in the 3424 from the webpage, but the is no response from the console

I forgot the password from the 3216, can see the webpage, but there is also no response from the console.
I tried with hyperterminal, putty and teraterm.
I used the usb-Adapter before the is no fault.

... strange ....
  0  
  0  
#3
Options
Re:Help can't Reset sg3424p with hyperterminal
2017-01-15 22:06:53
Did you set Hyperterminal's parameters correctly? Settings should be:

 Bits per second: 38400bps
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow control: None

Then power on the switch. You should see a message "Press CTRL-B to enter the bootrom". Do so to see the bootrom menu. There you can reset the switch.

If it still doesn't work, check the serial cable/adapter you are using.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1192

Replies: 3

Related Articles