CPE 510 rate limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 510 rate limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE 510 rate limit
CPE 510 rate limit
2016-09-01 22:25:17
Model : cpe510

Hardware Version :

Firmware Version : 1.3.3

ISP :

I have been using the cpe 510 for a while now and currently use a switch with QOS traffic shaping afterwards in order to limit the access speed. I was wondering if there is an option hidden somewhere in order to achieve this on the radio itself.
  0      
  0      
#1
Options
6 Reply
Re:CPE 510 rate limit
2016-09-02 17:15:21
It's not hidden, at least on FW 1.3.2
But it won't work better than your switch
  0  
  0  
#2
Options
Re:CPE 510 rate limit
2016-09-02 17:24:21
Well, maybe there is a trick with iptables, but keeping in mind that the radio is based in Busybox and the system is readonly the chances to achieve this are near 0.
If you find something related to that please let us know. ;)
  0  
  0  
#3
Options
Re:CPE 510 rate limit
2016-09-02 20:56:27

zacaro wrote

Well, maybe there is a trick

No tricks, QOS is there
If you want the radio to behave the way you wish
My advice, flash LEDE, all your needs will be fulfilled
If you do, before, just make sure you can upload Tp-Link FW via Recovery mode
In case you don't like it, you can go back to stock, here http://forum.tp-link.com/showthread.php?81684-How-to-use-firmware-recovery-function-of-Pharos-CPE
  0  
  0  
#4
Options
Re:CPE 510 rate limit
2016-09-07 02:37:18
I am aware of the QOS checkbox on the wireless tab but this does not limit bandwidth. Can you direct me to the tab where I can limit the bandwidth with ingress, egress, burst and the like? My firmware version is 1.3.3
  0  
  0  
#5
Options
Re:CPE 510 rate limit
2016-09-07 17:13:09
I can limit the bandwidth with ingress, egress, burst and the like? hepl me
  0  
  0  
#6
Options
Re:CPE 510 rate limit
2016-09-07 20:08:22

egagne wrote

ModelI have been using the cpe 510 for a while now and currently use a switch with QOS traffic shaping afterwards in order to limit the access speed. I was wondering

I am aware of the QOS checkbox on the wireless tab but this does not limit bandwidth

If you have a switch with QOS
Answer this, why you want to do qos on Pharos
Read again post #2 same answer dif words
  0  
  0  
#7
Options