POE splitter for CPE 510
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
POE splitter for CPE 510
Model :
Hardware Version :
Firmware Version :
ISP :
Hi all
i thought i would create a second thread for this issue.
I wish to use the POE pass through function on my CPE 510 to power a CCTV camera. However the camera requires active POE whereas the CPE 510 seems to only support Passive POE on pass through.
Is there an adapter i can plug into the second port on the CPE 510 to change the Passive to active POE and power the camera? the camera requires a 12v whilst the AP gives out 24v so voltage will also need to be knocked down. Camera does have a 12v jack so a splitter with this functionality might be the answer.
Regards
Hardware Version :
Firmware Version :
ISP :
Hi all
i thought i would create a second thread for this issue.
I wish to use the POE pass through function on my CPE 510 to power a CCTV camera. However the camera requires active POE whereas the CPE 510 seems to only support Passive POE on pass through.
Is there an adapter i can plug into the second port on the CPE 510 to change the Passive to active POE and power the camera? the camera requires a 12v whilst the AP gives out 24v so voltage will also need to be knocked down. Camera does have a 12v jack so a splitter with this functionality might be the answer.
Regards