CPE 510 Ap mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 510 Ap mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE 510 Ap mode
CPE 510 Ap mode
2016-09-17 22:33:46
Model :

Hardware Version :

Firmware Version :

ISP :

Hi all,i have to do(for many reasons) a subnet for myself(i share my connection with others). I have a cpe wired directly on the modem of my isp,and now it's set up like this : Ap mode,ip 192.168.0.244,subnet 255.255.255.0,gateway 192.168.0.254,dns primary 8.8.8.8 and sec 8.8.4.4 ... now i want to do a subnet for myself,and i think i have to use the "Ap router" mode...or i'm wrong? How i have to set up it? i'd like to have a subnet on 192.168.1.x..

Thanks in advance!!
  0      
  0      
#1
Options
5 Reply
Re:CPE 510 Ap mode
2016-09-23 05:40:30
Sorry for my bad English is not my native language .... I understand that you have the 0.x the ISP subnet, so you've set at 510, with share your connection outside the home; I also understand that you would like to have separate sub networks, your home 1.x and you share x.x ...

now a question .... when you say MODEM ISP, you mean just MODEM or a modem router with WiFi integrated for your home, that it is not clear for me ... if you have WiFi in your home with your ISP, you should only create the subnet to share, but as I understand it, I can not help but until you answer ...

Regards...
  0  
  0  
#2
Options
Re:CPE 510 Ap mode
2016-09-23 19:26:25
This is the setting up of my internet connection..i would like that the cpe 510 manage the subnet,so on my home i have 192.168.1.x...is it clear now? Sorry but i know is not easy to understand me
File:
Rete.jpgDownload
  0  
  0  
#3
Options
Re:CPE 510 Ap mode
2016-09-30 02:34:57
Sorry for delay in the response ....

Undestand the subnet to which is referred to as xx1.x for your home ... understand your diagram according to who gives Internet connection through CPE510 if for your home ...

It should set the 510 as AP ROUTER ...in the WAN port the same subnet x.x.0.x and LAN port in the subnet desire x.x.1.x, of course active DHCP and NAT enabled...

Regards...
  0  
  0  
#4
Options
Re:CPE 510 Ap mode
2016-09-30 19:51:28
Thanks for reply..i don't want to annoy you,but i don't know how to set the dns servers and the gateway..what i have to put on here??
File:
rete2.jpgDownload
  0  
  0  
#5
Options
Re:CPE 510 Ap mode
2016-09-30 20:44:14

Brd wrote

Thanks for reply..i don't want to annoy you,but i don't know how to set the dns servers and the gateway..what i have to put on here??

WOW?
Your question, it's answered by yourself
Just read your own opening Thread, post #1
  0  
  0  
#6
Options