[T2600G-28TS] Failed to get time from NTP server.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[T2600G-28TS] Failed to get time from NTP server.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[T2600G-28TS] Failed to get time from NTP server.
[T2600G-28TS] Failed to get time from NTP server.
2016-09-19 17:26:45 - last edited 2022-08-12 07:10:40
Model :

Hardware Version :

Firmware Version :

ISP :

Hardware Version: T2600G-28TS 1.0
Firmware Version: 1.0.1 Build 20151216 Rel.65850(s)

I'm trying to setup NTP sync for T2600G-28TS.
But with any NTP server I've tried to use (including default) I get the same error "Failed to get time from NTP server."
All servers I've tried are working (checked with ntpdate -q).
Any help? What's causing this problem?
  0      
  0      
#1
Options
1 Accepted Solution
Re:[T2600G-28TS] Failed to get time from NTP server.-Solution
2018-03-07 06:29:30 - last edited 2022-08-12 07:10:40
thanks

solved by Static Routing configured.

Destination - 0.0.0.0
Subnet Mask - 0.0.0.0
Next Hop - gateway ip
Distance - 1

Recommended Solution
  3  
  3  
#8
Options
10 Reply
Re:[T2600G-28TS] Failed to get time from NTP server.
2016-09-20 10:27:43
You should make sure your T2600 connect to the Internet.
http://www.tp-link.com/en/faq-940.html
  0  
  0  
#2
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2016-09-20 16:16:50
There's no "System IP" setting at the T2600G-28TS web interface. And there's no obvious way to setup default gateway for the internet connection. Am I missing something?
The switch is connected to the network, which has internet connectivity.
  1  
  1  
#3
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2016-09-20 16:22:53
Nevermind my previous answer. Problem is solved by adding default route to the static routing table.
  0  
  0  
#4
Options
T2600G 28TS Failed to get time from NTP server
2016-11-12 13:24:54
I do not know, I tried to set up a server Australian with 21 hop and 500ms delay and BktTimeSync works fine with no errors.What antivirus do you use?
  0  
  0  
#5
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2018-03-06 10:34:22
Hello,


I am having this same issue.


any fix maybe in detail ?


thanks
  0  
  0  
#6
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2018-03-07 02:58:59

BUFFBOY wrote

Hello,


I am having this same issue.


any fix maybe in detail ?


Set up a default route on your switch to your main router. See https://www.tp-link.com/en/faq-1126.html
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#7
Options
Re:[T2600G-28TS] Failed to get time from NTP server.-Solution
2018-03-07 06:29:30 - last edited 2022-08-12 07:10:40
thanks

solved by Static Routing configured.

Destination - 0.0.0.0
Subnet Mask - 0.0.0.0
Next Hop - gateway ip
Distance - 1

Recommended Solution
  3  
  3  
#8
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2020-06-10 12:44:56

I use a more strict routing

  • Destination: Timeserver IP
  • Subnet Mask: 255.255.255.254
  • Next Hop: Gateway IP
  • Distance: 1
  1  
  1  
#9
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2020-06-27 18:23:03

@tnt Can you please tel me how to set it up in the Static routing table

 

Regards

Manie

  0  
  0  
#10
Options
Re:[T2600G-28TS] Failed to get time from NTP server.
2020-06-27 18:26:10

@Manie 

 

Thank. I got it working

 

I just had to read on.....smiley

  0  
  0  
#11
Options