danymarc wrote

Esa parte a ido mejorando con los Bins
Lo malo es que hace mucho que abandonaron el desarrollo
Ese Bin que mencionas, debería estar en la web de TL
o por lo menos, aquí en Betas
Y no en nuestras manos nada mas

Edición: pregunta
Que pasa si usas 20/40Mhz

No lo probe en 20Mhz, hoy a la noche cuando no hay clientes conectados lo pruebo y comento. Si funciona a 20Mhz creo que seria un bug a solucionar.

ghost wrote

No lo probe en 20Mhz, hoy a la noche cuando no hay clientes conectados lo pruebo y comento. Si funciona a 20Mhz creo que seria un bug a solucionar.

Efectivamente en 20mhz funciona correctamente, evidentemente es un bug, no queda otra mas que esperar a que lo solucionen con algun firm.

Resumo en ingles.

If i try to connect in 10Mhz channel width dosnt work, but in 20Mhz works fine.

Please tp-link solve this as soon as you can.


Saludos

ghost wrote

If i try to connect in 10Mhz channel width dosnt work

Edit your post, and elaborate
connect to what, MKT won't be enough add model
they won't read the whole thread, remember was carried in Spanish
I will erase this one, once you edit, so yours is last one
I advise, to mail support, with this issue too
And PM Administrator too
Regards

Hardware used for testing:

CPE210 v1.1 firmware version 1.3.3 Build 20160713 Rel. 49556
RB433UAH
MiniPCI Ubiquiti XR2 802.11a/g 600mW
MiniPCI Compex 802.11a/g 200mW

Configuration:
WDS: No
Security: None


The only way to stabilish a conection is in 20Mhz channel width. If i try to connect in 10Mhz dont do anything, no error in log. In the site survey show the APs.

Ghost... Hi...

I have read carefully the 15 post of this thread, and have been sending to detour to @danymarc , by responding looking for help in vain, because the problem does not go where you started the thread... All this for a mistake that I detected in the last thing you wrote ...

ghost wrote

Hardware used for testing:

CPE210 v1.1 firmware version 1.3.3 Build 20160713 Rel. 49556
RB433UAH
MiniPCI Ubiquiti XR2 802.11a/g 600mW
MiniPCI Compex 802.11a/g 200mW

Your problem is not the Pharos connection with MikroTik ... or updating BIN's because this one is a gateway to connect the MINI PCI cards have..

Your problem is one of two cards connected to MikroTik ... answer this ... ???

Which of the two cards you want to connect ... ???

that's where your bug resides ...

Regards...

The two cards have diferent SSID, I can not connect to either if I put the channel width 10Mhz, but if i use 20Mhz works fine.

Only clarifies the hardware used for testing.

------------

Las dos placas tienen diferente SSID, no me puedo conectar a ninguna de las dos si uso un ancho de canal de 10Mhz, pero si uso 20Mhz funciona perfecto.

Solo aclare el hardware que use para las pruebas.

ghost wrote

The two cards have diferent SSID, I can not connect to either if I put the channel width 10Mhz.

not interested in the SSID, you should it look like fix your compatibility issue with any of the cards that will connect ...

Regards...

PD...

I don't know if TP-Link you have any BIN to fix BUG's with these two brands of cards and that bandwidth ...

a question..... are WISP???

Victor Ramos wrote

not interested in the SSID, you should it look like fix your compatibility issue with any of the cards that will connect ...

Regards...

PD...

I don't know if TP-Link you have any BIN to fix BUG's with these two brands of cards and that bandwidth ...

a question..... are WISP???

fix? i dont understand what you want to say.

In 20Mhz works fine!

In 10Mhz dont work.


Yes, more than 10 years in industry.

ghost wrote

1-fix? i dont understand what you want to say.
2-Yes, more than 10 years in industry.

@ghost
1-he wants to say that you been seeking for a solution on Pharos Tp-Link
and Tp-Link wont provide one, cause is not a Tp-Link Bug
2-sobre los 10 años
no olvides que el dinero solo quita el hambre