ARP Inspection enable
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ARP Inspection enable
Model :
JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots [URL="http://www.tp-link.com/en/products/details/T2600G-28TS.html"]T2600G-28TS
[/URL]
Hardware Version : V1
Firmware Version : T2600G-28TS(UN)_V1_160412
ISP : Not
Good night staff.
I'm new here in the forum and this is my first post.
I have two cascaded switches T2600G-28TS V1 with 24 ports. The second port of the first switch, have a local area network (192.168.10.x). The port 24 has another sub LAN (192.168.20.x). The two networks are separated by vlan. My question is this function called ARP Inspection / ARPDetect. I would like to improve the security of my network with this function turned on, but I'm unsure of how to activate. I do not know which port (core switch) I need to activate this function. I ask, would if the port of my two gateways (2 and 24 Trusted Port?)
And in the second cascaded switch, I need to enable the same function?
Sorry the English errors
Regards,
[/URL]
Hardware Version : V1
Firmware Version : T2600G-28TS(UN)_V1_160412
ISP : Not
Good night staff.
I'm new here in the forum and this is my first post.
I have two cascaded switches T2600G-28TS V1 with 24 ports. The second port of the first switch, have a local area network (192.168.10.x). The port 24 has another sub LAN (192.168.20.x). The two networks are separated by vlan. My question is this function called ARP Inspection / ARPDetect. I would like to improve the security of my network with this function turned on, but I'm unsure of how to activate. I do not know which port (core switch) I need to activate this function. I ask, would if the port of my two gateways (2 and 24 Trusted Port?)
And in the second cascaded switch, I need to enable the same function?
Sorry the English errors
Regards,
